Maintenance Skills Of Automobile Sealing Rubber

Maintenance Skills Of Automobile Sealing Rubber

A single wire seal manufacturer will share this article.

1.Daily maintenance and use skills of automobile sealing tape

1)Check whether the sealing strip is cracked or broken. If the sealing strip is broken, it can be repaired with adhesive. Especially the use of special adhesive for sealing strips can easily repair large cracks. Of course, if the sealing strip is severely damaged or aging, it is better to replace the new sealing strip to save trouble.

2)After the car owner uses car detergent to clean the door and window sealing strips, it is best to apply a layer of high permeability protective agent, which can prevent the sealing strip from aging and greatly improve the sealing performance of the sealing strip. In addition, the gaps between the sealing strips are easily filled with sand and dust, which can cause rust. For this reason, sand and dust should be removed with a brush.

3) When replacing the entire car body, a layer of sealant should be applied to the overlapped part of the weld. The thickness of the glue layer should be about 1mm, and the glue layer must not have defects such as virtual stickiness and air bubbles. 3mm-4mm elastic coating and anti-corrosion coating should be applied to the entire lower surface of the floor and the lower surface of the front-wheel cover. These measures can not only greatly enhance the sealing performance of the vehicle and slow down the corrosion rate of the body, but also greatly improve the ride comfort.

4)The sealing between the door and the body is a difficult part. The sealing requirements are relatively strict, the part to be sealed is relatively long, the cross-sectional shape of each sealing part is not the same, and the door is opened and closed frequently. In luxury cars, three and four seals are often installed, and the four-layer seal structure of the front pillar and roof side beam is installed. This kind of multi-channel seal is generally arranged in the front door seam. In addition to the sealing function, it also has the effect of automobile sound insulation and noise reduction.

5)After the car window glass is damaged, the car owner should check whether the sealing strip is damaged when changing the glass. Since car windows often fail to return to their original shape after being repaired, in addition to ensuring that the car window glass can be easily pulled or raised and lowered, attention must be paid to the sealing around the car window glass. If the gap between the glass and the glass notch is uneven, and the rubber strip is in poor contact with the glass and the glass groove, the car owner can easily pull the sealing strip off by hand.

6)When changing the roof of the car, the owner should first apply a layer of conductive sealant on the periphery of the roof. After the welding is completed, apply hemming glue all over the water tank and the joints, which will not only help the body The sealing can prevent the car body from rusting early due to the accumulation of water at the flanging weld.

7)The car sunroof is the basic configuration of most family cars. When the sunroof of the car is opened, the rubber sealing strip track is exposed to the air, which inevitably accumulates dust and even runs into small gravel. Long-term use may cause the sunroof to be deformed due to wear and tear and block the drainage hole. Therefore, it is very important to clean the track regularly and apply lubricant to the track.

Although the car sealing strip is a small part of the car body, it can ensure the stability and weight of the opening and closing door, and it can also protect the car from wind and rain, dust, heat and sound insulation, and has a decorative effect on the edges of the doors and windows. When the body is subjected to vibration and distortion, the sealing strip also functions as a buffer, shock absorption, and protection glass. Therefore, car maintenance is no small matter, and no link can be ignored.

A car is composed of many parts. The most important core components of a car are nothing more than the three major parts, the engine, the gearbox, and the car chassis. The car owner is very concerned about the maintenance of these three parts, but some small parts owners may Not so concerned, such as car seal rubber maintenance.

2.Maintenance skills of automobile sealing rubber

The recent weather is sometimes cloudy and sunny and sometimes heavy rain. Some car owners will find that the car is inexplicably leaking or leaking when using the car on rainy days. This may be the aging and peeling off the car sealing rubber, and the car owner did not take treatment measures in time.

Car owners should pay more attention to the state of the car rubber and check whether there are obvious gaps between the sealing strips and whether there is any breakage. If a slight break is found, it needs to be repaired with adhesive in time. If necessary, the owner is advised to replace the car's rubber seal.

Frequently clean the rubber strips to remove impurities in the rubber strips, so that the rubber strips have better sealing performance, and we can use the car windows more conveniently.

If the windows of the car are damaged, you should also pay attention to the sealing strips when replacing the windows. If there is a large gap between the sealing strip and the window after replacing the window, it must be repaired or replaced in time. Otherwise, on a rainy day, the car that instinctively shields the wind and rain may get flooded.

Pay attention to the cleaning of the sealing strip in the skylight track. When we open the skylight, it is easy to enter dust and other impurities in the sealing tape. This will not only make the sealing of the skylight worse but also block the track of the skylight. It may prevent the skylight from opening normally. It is very important to clean the sealing strip of the skylight track regularly. After cleaning the skylight, you can put a little butter on the track to ensure the smooth closing process of the skylight.

If you are interested in our products, please welcome to purchase our automotive connector single wire seal.